Lotus – MAX_L 600 Hammer
Design Highlights
- Hammer to Drill a hole of dia 156-178 mm (6 1/8”– 7”).
- Lotus _MAX_L600 is a valve less type hammer designed for high performance at low operating air pressures
- QL60 bit has a strong robust design to withstand heavy duty application
- Lotus _MAX_L600 Hammer maximizes energy output and reduces service requirements.
- Wear sleeve is not reversible.
- Three Start threads on Top sub and Drive sub ensure easy coupling/uncoupling of hammer.
- All critical internal components are heat treated under strict control to maximize tool longevity.
- An overall cost-effective and user friendly tool for use in the most demanding conditions.
Application: Construction & Quarry
| Size | NAME OF ITEM | QTY |
| 1 | TOP SUB (3 1/2” API REG PIN) | 1 NO |
| TOP SUB (3 1/2” API REG PIN) | 1 NO | |
| TOP SUB (5D 3 1/2” IF THRD PIN) | 1 NO | |
| 2 | O RING FOR TS, ALINGER | 2 NO |
| 3 | CHOKE FULL/HALF/QUARTER | 1 NO |
| 4 | CHECK VALVE | 1 NO |
| 5 | SPING | 1 NO |
| 6 | STEEL MAKEUP RING | 1 NO |
| 7 | LOCK RING | 1 NO |
| 8 | AIR DISTRIBUTOR | 1 NO |
| 9 | O RING FOR AD & BRR | 2 NO |
| 10 | O RING FOR SEATING RING | 1 NO |
| 11 | SEATING RING | 1 NO |
| 12 | INNER CYLINDER | 1 NO |
| 13 | PISTON | 1 NO |
| 14 | WEAR SLEEVE | 1 NO |
| 15 | PISTON RET RING | 1 NO |
| 16 | ALIGNER | 1 NO |
| 17 | BIT RETAINER RING | 1 NO |
| 18 | DRIVER SUB | 1 NO |
| SERVICE KIT S.NO 2,3, 5, 9, 10 | 1 SET | |
| HAMMER ASSEMBLY | 1 NO | |
| HAMMER ASSEMBLY | 1 NO | |
| HAMMER ASSEMBLY | 1 NO |
Hammer Specification
| S. NO | DESCRIPTION | UNIT | DIMENSIONS |
| 1 | HAMMER LENGTH W/O BIT | MM | 1035.0 |
| 2 | HAMMER OUTSIDE DIA | MM | 144.0 |
| 3 | HAMMER WEIGHT | KG | 100.0 |
| 4 | CYLINDER BORE | MM | 115.8 |
| 5 | PISTON STROKE | MM | 80.0 APPROX |
| 6 | PISTON WEIGHT | KG | 20.0 |
| 7 | HOLE SIZES | MM | 156-178 |
| 8 | WRENCH SIZE A/F | MM | A/F 100 / W-50.0 |
| 9 | SUITABLE SHANK | — | QL50 WITH FOOT VALVE |